Original
By certification 
Brife Introduction of biomass pellet line
A complete pellet making line capacity is from smaller 500kg/h to bigger 30ton/h.
Until now hundreds of pellet production lines are installed in China and abroad, such as France, Bulgaria, Romania, Hungary, Argentina, Belarus, Japan, Korea, India, Indonesia, Vietnam, Malaysia, Thailand, Laos, ect . Greatly welcome to visit our factory.
Requirements of Raw Materials for Pelletizing
Raw material : wood, waste wood and straws, etc. such as woodchips(palm, pine white pine, mahogany, pinus sylvestris, rubber tree), bamboo shavings, rice hust, seeds shells, peanut shells, halm, pennisetum, wheat straw, corn stalk, cotton stalks, alfalfa grass, bagrass, palm fiber, waste paper, non-physical material.
Size: Less than 5mm (All the raw materials must be crushed into sawdust before going into wood pellet machine.If not, you may need a wood chipper, wood crusher.)
Moisture: Generally, 10-15% is best for producing good quality pellet.
Detailed explanation of the complete biomass pellet line
1.Crushing Process:
a. If the raw material is big wood log with bark,we need wood debarker machine and wood splitter machine to make the wood with small size.
b. If the thickness of raw wood material is >10mm, and >50 * 50mm(L * W), we need use the Wood Chipper to chip them into small pieces, then crush the small pieces into wood powder with diameter less 5mm by Hammer Mill (Crusher).
2. Drying Process:
The best moisture content to pelletizing is about 10-15%. Our Rotary Dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 50% to 10%. Our stove is fueled by coal, which can save electricity consumption largely.
3. Pelleting Process:
Wood Pellet Mill is the most important equipment, which have the following features:
a. Perfect Turn-Key Project;
b. 24 hours continuous running;
c. Stable and Durable Equipment Function;
d. Competitive Price with Good Quality;
e. Lower Energy Consumption and Less Manpower;
4. Cooling Process:
After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is about 14%, so we need use Cooler to reduce about 3-4% moisture, such this the wood pellet is easy to store.
But considering the feedback from some foreign clients, the local climate is very humidity; they hope to cool the wood pellet with moisture 7-8%. In order to satisfy the different need from different clients, we develop one kind of new Stabilizer Combined Cooler.
5. Packing Process:
After cooling, the wood pellet will not directly enter into the fuel process, avoiding the wood pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you.
About Us
Jiangsu Liangyou International Mechanical Engineering Co., Ltd is an export-oriented company specializing in overseas business, which belongs to Jiangsu Liangyou Agro Machinery Co., Ltd.. In order to better explore and develop overseas business, now we put the overseas business in Jiangsu Liangyou Agro Machinery Co., Ltd., Jiangsu Liangyou Silo Engineering Co., Ltd., and Jiangsu Liangyou Renewable Energy Mechanical Engineering Co., Ltd. together to Jiangsu Liangyou International Mechanical Engineering Co., Ltd.
The company is aiming at "keep brand ahead in domestic, and guarantee quality in overseas", concentrating on research, development, design and manufacture of Agro machinery, silo, and renewable energy machinery, forming industrial pattern covering machinery regarding feeding, animal husbandry, agro husbandry, cultivation, microbe, environmental protection, silo, renewable energy etc. We have passed ISO 9001:2008 quality management system certification, and get CE, SGS certificates. Products are exported to many countries in Middle East, Europe, America, South East Asia and Africa etc.
A complete pellet making line capacity is from smaller 500kg/h to bigger 30ton/h.
Until now hundreds of pellet production lines are installed in China and abroad, such as France, Bulgaria, Romania, Hungary, Argentina, Belarus, Japan, Korea, India, Indonesia, Vietnam, Malaysia, Thailand, Laos, ect . Greatly welcome to visit our factory.
Requirements of Raw Materials for Pelletizing
Raw material : wood, waste wood and straws, etc. such as woodchips(palm, pine white pine, mahogany, pinus sylvestris, rubber tree), bamboo shavings, rice hust, seeds shells, peanut shells, halm, pennisetum, wheat straw, corn stalk, cotton stalks, alfalfa grass, bagrass, palm fiber, waste paper, non-physical material.
Size: Less than 5mm (All the raw materials must be crushed into sawdust before going into wood pellet machine.If not, you may need a wood chipper, wood crusher.)
Moisture: Generally, 10-15% is best for producing good quality pellet.
Detailed explanation of the complete biomass pellet line
1.Crushing Process:
a. If the raw material is big wood log with bark,we need wood debarker machine and wood splitter machine to make the wood with small size.
b. If the thickness of raw wood material is >10mm, and >50 * 50mm(L * W), we need use the Wood Chipper to chip them into small pieces, then crush the small pieces into wood powder with diameter less 5mm by Hammer Mill (Crusher).
2. Drying Process:
The best moisture content to pelletizing is about 10-15%. Our Rotary Dryer is made up of Stove and Main Rotary Dryer, which can realize to reduce the moisture from 50% to 10%. Our stove is fueled by coal, which can save electricity consumption largely.
3. Pelleting Process:
Wood Pellet Mill is the most important equipment, which have the following features:
a. Perfect Turn-Key Project;
b. 24 hours continuous running;
c. Stable and Durable Equipment Function;
d. Competitive Price with Good Quality;
e. Lower Energy Consumption and Less Manpower;
4. Cooling Process:
After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is about 14%, so we need use Cooler to reduce about 3-4% moisture, such this the wood pellet is easy to store.
But considering the feedback from some foreign clients, the local climate is very humidity; they hope to cool the wood pellet with moisture 7-8%. In order to satisfy the different need from different clients, we develop one kind of new Stabilizer Combined Cooler.
5. Packing Process:
After cooling, the wood pellet will not directly enter into the fuel process, avoiding the wood pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you.
About Us
Jiangsu Liangyou International Mechanical Engineering Co., Ltd is an export-oriented company specializing in overseas business, which belongs to Jiangsu Liangyou Agro Machinery Co., Ltd.. In order to better explore and develop overseas business, now we put the overseas business in Jiangsu Liangyou Agro Machinery Co., Ltd., Jiangsu Liangyou Silo Engineering Co., Ltd., and Jiangsu Liangyou Renewable Energy Mechanical Engineering Co., Ltd. together to Jiangsu Liangyou International Mechanical Engineering Co., Ltd.
The company is aiming at "keep brand ahead in domestic, and guarantee quality in overseas", concentrating on research, development, design and manufacture of Agro machinery, silo, and renewable energy machinery, forming industrial pattern covering machinery regarding feeding, animal husbandry, agro husbandry, cultivation, microbe, environmental protection, silo, renewable energy etc. We have passed ISO 9001:2008 quality management system certification, and get CE, SGS certificates. Products are exported to many countries in Middle East, Europe, America, South East Asia and Africa etc.
