Good performance Stainless Steel RS Flexible Sleeve Expansion joint

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2017-12-01 05:05
Browse the number: 138
inquiry
Company Profile
 
 
Product details

Detailed descriptions of Flexible Sleeve  Expansion joint

Product specification: 

This product provides great convenience for water supply pipeline,water tower,water pump,water meter and valve to install and detach.It also can compensate the expansion or contraction caused by temperature change.

The material of the inner the product includes cast iron(HT),ductile cast iron(QT), Carbon steel(Q235),and stainless steel(304,316).

Loose the gland bolts before installs it,then pull the product to the installation length and fasten it,squash is forbidden.Sometimes,fixed supports on the both side are necessary.

The flange conection adopts the standard of GB/T9115-2000.

 RS Flexible Sleeve  Expansion joint

Technical Conditions

 item

type

JGD-1

JGD-2

JGD-3

working pressure Mpa(kgf/cm2)

1.0(10)

1.6(16)

2.5(25)

burst pressure MPa(kgf/cm2 )

2.0(20)

3.0(30)

4.5(45)

vacuum KPa(mm/Hg)

53.3(400)

86.7(650)

100(750)

applicable temperature °C

-15°C~ +115°C  under special conditions-30°C  ~+250°C 

applicable media

Air, compressed air, water ,sea water ,hot water, oil, acid ,alkali etc.

 

 Main Data

Nominal Diameter(DN)

                   Length(L)

 (min.)L

Installation Length L

 (max.) L

40

140

160

180

50

145

165

185

65

145

165

185

80

160

180

200

100

170

180

210

125

170

190

210

150

175

190

215

200

180

195

220

250

235

200

285

300

250

260

310

350

265

280

335

400

280

300

360

450

295

320

385

500

310

340

410

600

340

360

460

700

370

400

510

800

400

440

540

900

430

470

570

1000

40

500

600

1200

475

525

625

1400

500

550

660

1600

530

610

690

Notes:

1, RS Flexible Sleeve  Expansion joint can produce deflection which can be up to 5.85°.

2, The number in the table are ones under the condition that there is no deflection.

3, The expansion joints are sealed by rubber rings and they can’t withstand the axial tension themselves. Generally, they are installed on the Straight Pipeline. If they are installed near bent pipes or T-tubes, buttresses are needed to prevent them from leaking.

4,Single-plate Short Pipes can be substituted by casting iron straight pipes.

5, Flange connection: GB2555-81

6, Table1: Installation Length

 

                      

 

 

 

 

 

   

Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]