Original
By certification 
Product Introduction:2 phase Digital Microstep Stepper Drive with current under 7.2A
ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--80VAC input, and can provide the right stepper drives to satisfy the special needs of your stepper control systems. ECON’s stepper products are well-known because of their wide choices, excellent performance, easy to use, high reliability, and low cost. The stepper drives have been used by thousands of OEM clients in the world from many of industries such as CNC machinery, medical, electronics, semiconductor, packaging, lab automation.
The high performance DH series digital stepper drives are featured with extra low noise, very low motor heating, and ultra smooth motor movements at low speed. With performance and cost balanced
DH860 is the new generation high performance fully digital stepper drive which base on 32bit DSP with a advanced algorithm .the power supply range is AC24~80V. it can drive frame 57---110mm 2 phase stepper motor .
Ultra low noise and high smoothness at middle/low speed ,and high torque at high speed, which can be applied to different speed control applications. adopt smooth and accurate sinusoidal current vector control technology ,which make motor low heat .
Product Features:2 phase Digital Microstep Stepper Drive with current under 7.2A
● New generation 32bit DSP
● Good smoothness ,low noise ,low heat
● Build-in micro step setting
● Build-in current setting
● The standstill current can be set to 50%
● Oopto-isolated differential pulse input
● The response frequency is up to 300KHz
● Over voltage , under voltage, over current protection
Applications
It can be used in various kinds of machines ,such as dispenser machine. floating machine
3D printer, labelling machine, medical machine, laser cut machine, and so on ,its unique features make it an ideal solution for the applications which require low noise ,low vibration, low heat and high precision
Mounting dimension(unit:mm）
Current Setting
Peak current(A) |
RMS current (A) |
SW1 |
SW2 |
SW3 |
2.40 |
2.00 |
ON |
ON |
ON |
3.08 |
2.57 |
OFF |
ON |
ON |
3.77 |
3.14 |
ON |
OFF |
ON |
4.45 |
3.71 |
OFF |
OFF |
ON |
5.14 |
4.28 |
ON |
ON |
OFF |
5.83 |
4.86 |
OFF |
ON |
OFF |
6.52 |
5.43 |
ON |
OFF |
OFF |
7.20 |
6.00 |
OFF |
OFF |
OFF |
Standstill Current Setting
SW4：OFF=Half Current
ON=Full Current
Microstep Setting
Pul/rev |
SW5 |
SW6 |
SW7 |
SW8 |
200 |
ON |
ON |
ON |
ON |
400 |
OFF |
ON |
ON |
ON |
800 |
ON |
OFF |
ON |
ON |
1600 |
OFF |
OFF |
ON |
ON |
3200 |
ON |
ON |
OFF |
ON |
6400 |
OFF |
ON |
OFF |
ON |
12800 |
ON |
OFF |
OFF |
ON |
25600 |
OFF |
OFF |
OFF |
ON |
1000 |
ON |
ON |
ON |
OFF |
2000 |
OFF |
ON |
ON |
OFF |
4000 |
ON |
OFF |
ON |
OFF |
5000 |
OFF |
OFF |
ON |
OFF |
8000 |
ON |
ON |
OFF |
OFF |
10000 |
OFF |
ON |
OFF |
OFF |
20000 |
ON |
OFF |
OFF |
OFF |
25000 |
OFF |
OFF |
OFF |
OFF |
Interface Description
Name |
Function |
Description |
PWR |
Power light |
When power on ,the green light is on |
ALARM |
Over current/under voltage/over |
If the drive Over current/under voltage/over voltage, the red light is on |
|
PU+ |
Pulse input positive |
Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, |
|
PU- |
Pulse input negative |
Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, |
|
DR+ |
Direction input positive |
DIR signal: In single-pulse mode, this signal has low/high voltage levels, |
|
DR- |
Direction input negative |
DIR signal: In single-pulse mode, this signal has low/high voltage levels, |
|
MF+ |
Enable input positive |
Enable signal: This signal is used for enabling/disabling driver. |
|
MF- |
Enable input negative |
Enable signal: This signal is used for enabling/disabling driver. |
AC1 |
AC Power input |
AC24-80V |
AC2 |
AC Power input |
|
A+,A- |
Motor A phase |
