VIB^®05 Vibrometer

The 3-in-1 machine condition monitoring

Vibration·Bearing Condition·Temperature

This Vibrometer has a built-in analysis function.

All you need is pushing the button and then the analysis result will be shown on the display.

Portable Vibrometer with ISO standard analysis function ,All you need is just install the sensor and push the start button. Big buttons that are easy to press even with gloves on .

What is "Vibration severity measurement instrument on the requirements 10816-3 ?

This standard is widely used for analysis of rotational machinery.

The current ISO standard 10816-3: 009 describes the absolute value judgment by velocity rms.

Easy-to-use handy vibrometer with diagnosis function VIB05 has three measurement modes such as acceleration, velocity and displacement.

Features

1. Three measurement modes : acceleration, velocity and displacement

2. Incorporates diagnosis functions compliant with ISO 10816-3

This unit automatically diagnoses the status of rotating machinery according to the vibration severity standard.

3. You can easily diagnose bearings according to the judgement criteria displayed on the back of the unit.

4. Incorporates a vibration pickup with a magnet to ensure stable measurement accuracy.

5. Carrying case made of hard-plastic is in standard configuration for easiness.

What can we know?

Acceleration

Bearing scratches, noise, gear abnormalities, cavitation, etc.

Velocity

Unbalance, misalignment, coupling failure, the slide bearing failure, foundation failure, impeller vibration, etc.

Displacement

Surging, water hammer, ground vibration, pulsation of the pipe

3 Measurements

Machine Vibration Measures

Velocity in mm/s RMS; Acceleration in g RMS; Displacement in um Peak-Peak

Vibration Evaluation: According to ISO10816-3。

Bearing Condition Measures

Bg - Hi Frequency Acceleration in g RMS;Bv - Hi Frequency Velocity in mm/s RMS。

Bearing Status Check: By using rules of thumb

Temperature Measure

Non-contact Infrared Sensor,Target and Environment in °C or °F,Red Laser Pointer。

VIB05 Specifications

Display: Monochromatic LCD, 128x64 pixial

Sensor: IEPE Accelerometer, 100mv/g, Integral 80 cm cable, BNC connector

Vibration:

Acceleration: 0-20 g Peak Frequency 10-12kHz

Velocity: 0-200mm/s RMS Frequency 10Hz-1kHz

Displacement: 0-2000 μm Peak-Peak Freq. 10Hz-1kHz

Bearing Status:

Bg: 0-20 g RMS Freq. Range 1kHz-12 kHz

Bv: 0-200 mm/s RMS Freq. Range 1kHz-12 kHz

Accuracy: < +/-5%

Alarm Indication:

Vibration Evaluation for velocity measure: ISO10816-3

Bearing Status check for BG and BV: Rule-of-thumb

Temperature:

IR Sensor temperature range: -20 °C to 120°C or -5°F to +250°F

Accuracy: ±2°C; Resolution: 1°C;

Laser guide : Red, <1mW. IEC 60825-1 compliant

Distance to surface D:S = 8:1; Recommend distance range: < 20 cm

Power & Charger:

Lithium rechargeable battery, 3.6V 1700 mAh,

Recharge time 3 hours ; Operating time >50 hours continuous

Mains charger: AC 100-240 V, 50/60 Hz input; 4.2 V DC 600 mA output

In-car charger: DC 12-24 V input; 4.2 V DC 600 mA output。

Environment:

Operation temperature: -10°C to +50°C; Storage temperature: -20°C to +60°C

Enclosure: IP64 - Dust-tight and splash-resistant

Electromagnetic compatibility certificate: 2004/108/EC

Dimensions:115 x 75 x 25mm（LxWxT）

Weight incl. battery:230g

VIB05 Complete Kit

http://www.kmvibrationanalyzers.com/